BXKQM - 249003 NSS SATIN STAINLESS CLEANER

  • MSDS: BXKQM
  • Manufacturer: QUEST CHEMICAL CORP
  • Product Name: 249003 NSS SATIN STAINLESS CLEANER
  • National Stock Number: 7930-00F039867
Product Identification

Product ID:249003 NSS SATIN STAINLESS CLEANER
MSDS Date:08/16/1993
FSC:7930
NIIN:00F039867
MSDS Number: BXKQM

Responsible Party
QUEST CHEMICAL CORP
12255 FM 529 NORTHWOODS IND PARK
HOUSTON, TX 77041
US

Emergency Phone: 713-896-8188

Info Phone: 713-896-8188

Cage: 014H9

Contractor
QUEST CHEMICAL CORP
HOUSTON, TX 77041 US

Telephone: 713-896-8118

Cage: 014H9

Ingredients

L.P.G. (LIQUID PETROLEUM GAS) PROPELLANT(FLAMMABLE)

CAS: 68476-85-7

RTECS: SE7545000

OSHA PEL 1000 PPM

ACGIH TLV: 1800 MG/CUM

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. INHALATION:
EXCESSIVE EXPOSURE MAY LEAD TO UNCONSCIOUSNESS. SKIN: MAY CAUSE
LOCALIZED DRYNESS IF OVEREXPOSED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DIZZINESS, UNCONSCIOUSNESS, IRRITATION,
REDDENING, DRYNESS OF SKIN.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH THOROUGHLY W/SOAP
& WATER. EYES: FLUSH THOROUGHLY. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:130F
Extinguishing Media:STANDARD
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:FLAMMABLE. CONTENTS UNDER PRESSURE.
EXPOSURE TO TEMP >120F MAY CAUSE BURSTING.

Accidental Release

Spill Release Procedures:WIPE UP W/RAG/USE SOME ABSORBENT CLAY
MATERIAL.

Handling

Handling and Storage Precautions:DON'T USE/STORE NEAR HEAT/OPEN FLAME.
EXPOSURE TO TEMP >120F MAY CAUSE BURSTING.
Other Precautions:NONE

Exposure Controls

Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:388F
Vapor Pres:0.5
Vapor Density:>1
Spec Gravity:0.8
Evaporation Rate & Reference:(BU AC =1): 0.2
Solubility in Water:0%
Appearance and Odor:CLEAR SPRAY W/LEMON SCENT

Stability

Stability Indicator/Materials to Avoid:YES
SOME PLASTICS
Stability Condition to Avoid:TEMP >120F, HEAT, OPEN FLAME

Disposal

Waste Disposal Methods:DISPOSE OF RESIDUE IAW/FEDERAL, STATE & LOCAL
REGULATIONS. DON'T PUNCTURE/INCINERATE CONTAINER. DON'T REUSE
CONTAINER. WRAP CONTAINER & PLACE IN TRASH COLLECTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.